Keep your vehicle and safety

Keep your vehicle and your safety

Learn ways to circumvent the challenges of your vehicle and avoid injury.

Be careful, avoid uprooted, sudden braking, climbing or brush on the curb, pothole, and charts on oil stains or other petroleum derivatives. You must be aligned in some cases, as when the vehicle impacted the suspension and when you are "pulling" to one side.

Check your tires frequently, noting that there are no stones or any object stuck in their ruts, damage to its extension and the existence of pressure. Control of this can only be done when the tires are cold (when warm, the housing is damaged), at least once a week, or before traveling, according to the manufacturer's directions and always putting the caps on the wheels. Both too much pressure on the least distracting, and there is change in tire grip. Always check the correct pressure for your tire .

The wheels have to be balanced every 5,000 miles, where vibrations arise, in exchange, rotation or tire repair because they cause wear these. Shock absorbers, bearings, brakes and axles may interfere with the performance of the vehicle, so you need to do periodic maintenance.

Always check headlights, arrows, lights, windshield wiper, brake light, the suspension system, shock absorbers and brakes.

And remember that defensive driving is considered the best way to drive, as well as being safer for passengers, is a way to take better care of your vehicle.

Learn the 10 tips to keep your vehicle!

Created by American Charles Goodyear, the tire came through the discovery of vulcanization of rubber after mixing it with sulfur at high temperatures.

Keystone car contact with the ground, whether it is in disrepair or even with wrong calibration can not only jeopardize the safety of vehicle occupants but also degrade the performance of the car.

To always keep your tires in the best driving conditions, we recommend you follow these 10 commandments:

1 - Calibrate the tire weekly according to the manual indication of the vehicle manufacturer and not according to the concessionaire or the attendant.

2 - Make the rotation of tires. vehicles with radial tires every 8,000 km and vehicles with bias tires every 5,000 km run, using the spare tire in the rotation.

3 - Avoid overloading the vehicle. Excess weight compromises the structure of the tire and increases the risk of burst or substantial structural changes.

4 - Do preventive maintenance of the entire vehicle. Shock absorbers, springs, brakes, bearings, axles and wheels work directly on the tires.

5 - Using measurements of tires and wheels displayed by the vehicle manufacturer. The car parts are designed to interact in a balanced manner. The use of tires and rodasdiferentes alter this balance.

6 - Align the suspension and balance the tires when the vehicle suffered severe shock, the exchange of tires when the tires show uneven wear, when they replaced the suspension when the vehicle is "pulling" to one side or 10,000 km.